Viewing 11 posts - 1 through 11 (of 11 total)
Hi All,
The issue has been resolved due to a routing configuration problem in the local network behind the PC with ICS; after correcting the routing, all PC's respond normally.
Thanks
Anubis.
August 13, 2020 at 2:15 am
Thanks Grant for the reply. I'll take a look at Availability Groups as Azure isn't really an option as all business logic exists within stored procedures and I understand from...
December 19, 2019 at 6:31 am
Hi Grant and Brahmanand,
Thank you for the replies; the amount of data written daily would be multi-GB across many thousands of transactions, so quite a lot.
Certainly, HA is important, the...
December 18, 2019 at 1:30 pm
Hi Chris,
Unfortunately not; it's coming from many field devices and needs to be accessible as soon as it's generated.
Thanks.
May 25, 2019 at 11:37 am
Chris, The version is 2017 enterprise.
Jeff, Thanks again for the detailed response - and it's good to know the info comes from real-world background.
You're correct, the only reason for daily...
May 24, 2019 at 2:56 pm
Hi All,
Thanks for the replies.
I have considered aligning the indexes with the partition scheme but as you mentioned Frederico, this requires tuning of the queries using the indexes to make...
May 24, 2019 at 1:10 pm
Hi Frederico,
Thanks for the prompt reply - that's unfortunate as it would create a huge overhead for this table - does the same apply if the indexes exist in the...
May 24, 2019 at 7:19 am
Hi All,
Thank you for your comments. It appears that I will have to alter my code as what I was attempting to do was catch errors on a more...
July 21, 2008 at 5:23 pm
Hello Michael,
Thank you again for your reply.
You have got it basically correct. I'm not actually using the authentication to deny the EXEC ability of the sp, but rather throwing...
July 3, 2008 at 7:21 pm
Hello Michael
Thank you very much for your reply; those were exactly the types of questions and comments that I was hoping for.
I apologize for some parts of my initial post...
July 2, 2008 at 5:30 pm
Hello,
Thanks for your quick response. Could I trouble you to expand a little more on your solution? I cannot clearly see the way in which you've structured the...
July 1, 2008 at 11:54 pm
Viewing 11 posts - 1 through 11 (of 11 total)