Viewing 15 posts - 1 through 15 (of 186 total)
Thank you for the feedback on this topic.
The developer tested after making these change and the performance has increased. The job that imports the 120K records are only taking 2...
March 16, 2022 at 11:57 am
Thank you very much and I like your feedback.
I was pulled off the project for a bit and will resume on Monday and will be able to address your comments.
March 13, 2022 at 5:22 pm
Thank you very much for the reply on this. I am still working on this project.
I have build a new server and added it to the cluster in the primary...
March 8, 2022 at 12:37 am
Thank you very much for the feedback on this topic. See my answers below:
Do all nodes in the cluster have access to the file share witness? If they are on...
March 8, 2022 at 12:24 am
Thank you very much for the feedback
I will first test the database on a cluster where there are two nodes in the same datacenter and while trying Synchronous and Asychronous...
February 7, 2022 at 2:29 pm
Thank you very much - that is what I thought. I marked your reply as "Answer"
January 20, 2022 at 3:05 pm
Thank you very much for the help on this subject and sorry it has taken me so long to reply to this, but I was able to run a test...
June 2, 2021 at 1:09 am
Thank you very much for the help
I will use the SP_help_Revlogin to recreate the logins on the secondary
I will also try the query see what the results are.
April 18, 2021 at 2:46 pm
Thank you very much for the feedback
The RDP time out is by design from the Server team and they tell me to use a VCenter console if I do not...
February 8, 2021 at 3:30 pm
Thank you very much for the feedback. Below are my comments and follow up questions
First - I'd recommend against cross posting. I found your post on here, Microsoft and VMWare....
September 9, 2020 at 3:47 pm
Thank you for the feedback
In my case I do not have any shared storage, so i wonder if it would be the same problem. I am running Windows 2012 R2,...
September 6, 2020 at 3:09 pm
Thanks
Yes, since my FULL and DIFF backups must be on the primary anyway, I am planning to set the AG to Primary as the preferred backup and creating the jobs...
August 26, 2020 at 11:29 pm
Thank you very much for the reply.
I do not have the exact parameter information, but we are using USER_DATABASES, 28 days retention, compression and a few other basic settings -...
August 26, 2020 at 12:43 am
I am currently writing something up and will post it once its done
August 7, 2020 at 8:47 pm
Yes, thanks for the reply that was exactly what it was. I will mark your reply as answer.
I had to replace the registry key like he mentions in the article...
June 5, 2019 at 3:31 pm
Viewing 15 posts - 1 through 15 (of 186 total)